Digital Alert Systems MultiPlayer DASMP 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Digital Alert Systems MultiPlayer DASMP에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Alert Systems MultiPlayer DASMP 13 페이지.

페이지 인쇄

Digital Alert Systems

Analog audio can be used as a mono source for any port,

as shown to the right.

Analog audio can also be used as a stereo left and right

source. To use Analog audio as a stereo source, Port 1

would need to be set to "ANALOG" and Port 2 would need

to be set to "SLAVE". This forms a bonded pair.

An analog stereo source can also be configured for ports 3

and 4. Port 3 would need to be set to "ANALOG" and Port

4 would need to be set to "SLAVE". This forms a bonded

pair.

The screenshot on the right shows 2 Analog stereo

sources being used.

*The Slave option can only be selected for Ports 2 and 4

With 2 Analog stereo sources set for the Multiplayer, Ports

1 and 2 are now Station 1 in the DASDEC Multistation

Interface. Ports 3 and 4 would be Station 3 in the

DASDEC Multistation Interface.

If only one Analog Stereo source is to be used, then the

Ports can be arranged in one of 2 ways.

If Ports 1 and 2 are configured as an Analog Stereo

source, Ports 1 and 2 are now Station 1 in the DASDEC

Multistation Interface. Port 3 is Station 3 in the DASDEC

Multistation Interface and Port 4 is Station 4 in the

DASDEC Multistation Interface.

Ports 3 and 4 can be set to AES, Analog, or ORIG

depending on the sources being used.

If Ports 3 and 4 are configured as an Analog Stereo

source, Ports 3 and 4 are now Station 3 in the DASDEC

Multistation Interface. Port 1 is Station 1 in the DASDEC

Multistation Interface and Port 2 is Station 2 in the

DASDEC Multistation Interface.

Ports 1 and 2 can be set to AES, Analog, or ORIG

depending on the sources being used.

You must make your selections for each Port when you would like to make a change. Once a selection has been made

for all of the ports, click on Save Changes. To ensure that your settings have saved, click the refresh button. If your

configuration remains the same below the pull down menus, then your settings have been saved.

Revision 4.0

DASDEC Multistation

Interface: Station 1

DASDEC Multistation

Interface: Station 1

Port 1= DASDEC

Multistation Interface:

Station 1

Port 2= DASDEC

Multistation Interface:

Station 2

MultiPlayer Quick Start Guide

DASDEC Multistation

Interface: Station 3

Port 3= DASDEC

Multistation Interface:

Station 3

Port 4= DASDEC

Multistation Interface:

Station 4

DASDEC Multistation

Interface: Station 3

Page 6 of 13