Crestron 4K DigitalMedia 3-Series 보충 설명서 - 페이지 10
{카테고리_이름} Crestron 4K DigitalMedia 3-Series에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron 4K DigitalMedia 3-Series 20 페이지. Media presentation controller
Crestron 4K DigitalMedia 3-Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 매뉴얼에서 (2 페이지), 빠른 시작 매뉴얼 (7 페이지), 빠른 시작 (2 페이지), 빠른 시작 매뉴얼 (8 페이지), 매뉴얼에서 (2 페이지), 매뉴얼에서 (2 페이지)

Configuration
In addition to the .AV Framework setup and management tool, the DMPS3-4K-150-C can
be configured using the web interface, which can be accessed from a web browser by
entering the IP address or hostname of the DMPS3-4K-150-C. SIMPL Windows can also be
used to configure the DMPS3-4K-150-C.
This section provides information about configuration of the following items using the web
interface or SIMPL Windows:
•
•
•
•
•
•
Adjustable Underscan
If content does not fit properly on a display, adjustments to underscan may be desired.
Adjustments can be made up to 7.5%. Adjusting the underscan reduces the image size by
the specified percentage so that the entire video frame is displayed.
To adjust underscan, use the DMPS3-4K-150-C web interface or SIMPL Windows as
discussed in the following sections.
Configuration Using the Web Interface
An overview of the steps necessary to adjust the underscan setting is as follows:
NOTE:
1. On the Main Setup page, click the INTERNAL SCALER Settings button.
2. In the Image Size list, click the radio button that corresponds to the desired
6 • DMPS3-4K-150-C: 3-Series 4K DigitalMedia Presentation System
Adjustable underscan
User-selectable output resolution
Standby timeout
Display mode
EDID
Connection to third-party HDBaseT equipment
For detailed information, refer to the online help of the web interface.
The Output Configuration page for the internal scaler opens.
underscan setting.
Output Configuration Page for Internal Scaler—Image Size (Underscan) Configuration
Supplemental Guide – DOC. 7724A