Siemens SIMATIC S7-200 매뉴얼 - 페이지 22
{카테고리_이름} Siemens SIMATIC S7-200에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC S7-200 35 페이지. Ethernet gateway for simatic mpi/ profibus driver
Siemens SIMATIC S7-200에 대해서도 마찬가지입니다: 매뉴얼 (30 페이지), 드라이버 매뉴얼 (28 페이지), 매뉴얼 (49 페이지), 매뉴얼 (18 페이지), 시스템 매뉴얼 (20 페이지)
페이지 인쇄
Micro Automation Set 14
5.
Ensure that the configuration PC is
connected to S7-300 "Backup" via
SCALANCE X108. Load the program to
the S7-300 CPU. When configuring the
S7-300 CPU for the first time, it is
required to select the connection partner
using the MAC address.
6.
Connect S7-300 "Backup" to S7-200
"Basis" via SCALANCE X108.
7.
Restart S7-200 "Basis".
Configuring S7-400 "Backup" station with STEP 7 project
Table 5-6
No.
1.
Connect the S7-400 PS to an AC 230 V
supply voltage.
2.
Switch on the power supply.
3.
Open the included S7-400 project
"Set14_S7-400_V2-0.zip" on the
configuration PC using STEP 7 and make
the following settings in STEP 7:
• Set the access point in "Set PG/PC
Interface" to "STEP7
network controller"
V2.0
Entry ID 21062588
Function
TCP/IP(Auto)
05/18/05
Configuration PC
IE cable
CPU 315 PN/DP
IE cable
"
S7-300
Backup"
IE cable
S7-200
"
Basis"
IE cable
Comment
Live Demo
SCALANCE X108
SCALANCE X108
22/35