Cisco 522 매뉴얼 - 페이지 17

{카테고리_이름} Cisco 522에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 522 40 페이지. Ip phones with multiplatform firmware
Cisco 522에 대해서도 마찬가지입니다: 사용자 설명서 (46 페이지), 관리 매뉴얼 (48 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (24 페이지)

페이지 인쇄

Headsets

Potential interference issues can occur. We recommend that you reduce the proximity of other 802.11b/g

devices, Bluetooth devices, microwave ovens, and large metal objects. If possible, configure other 802.11

devices to use the 802.11a channels.

For a Bluetooth wireless headset to work, it does not need to be within direct line-of-sight of the phone. But

some barriers such as walls or doors can affect the connection. Interference from other electronic devices can

also affect performance.

When headsets are more than 30 feet (10 meters) away from the Cisco IP Phone, Bluetooth drops the connection

after a 15- to 20-second timeout. The paired headset reconnects when it is comes back into range of the Cisco

IP Phone. For certain phone types that operate in power-save modes, you can wake up the headset by tapping

on the operational button.

Enable the headset before you add it as a phone accessory.

The phone supports various Handsfree Profile features that allow you to use devices such as Bluetooth wireless

headsets for certain tasks. For example, instead of pressing Redial on the phone, you can redial a number from

the Bluetooth wireless headset by following instructions from the headset manufacturer.

Cisco IP Phone 8811, 8841, 8851NR, and 8865NR do not support Bluetooth wireless headsets. These hands

free features apply to Bluetooth wireless headsets that are used with the Cisco IP Phone 8845, 8851, 8861

and 8865:

• Answer a call

• End a call

• Change the headset volume for a call

• Redial

• Caller ID

• Divert

• Hold and Accept

• Release and Accept

Hands free devices have different feature activation methods. Device manufacturers may also use different

terms when referring to the same feature.

Important

Only one headset type works at any given time. If you use both a Bluetooth headset and an analog headset

that are attached to the phone, enabling the Bluetooth headset disables the analog headset. To enable the analog

headset, disable the Bluetooth headset. Plugging a USB headset into a phone that has Bluetooth headset

enabled disables both the Bluetooth and analog headset. If you unplug the USB headset, you can either enable

the Bluetooth headset or disable the Bluetooth headset to use the analog headset.

For information about how to use your Bluetooth wireless headset, see:

• Cisco IP Phone 8800 Series User Guide

• User Guides provided with your headset

Bluetooth Wireless Headsets

Headsets