Cisco 7940G 사용자 설명서 - 페이지 16

{카테고리_이름} Cisco 7940G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7940G 16 페이지. Ios telephony services ip phone
Cisco 7940G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 데이터시트 (7 페이지), 매뉴얼 (35 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (15 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 전화 매뉴얼 (17 페이지), 관리자 매뉴얼 (15 페이지), 참조 매뉴얼 (24 페이지), 관리 매뉴얼 (29 페이지), 매뉴얼 (21 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (10 페이지)

Addendum for Multi-Line Phones IP 7960

Many times when answering the phone for someone else in the office, it is possible that the person for

whom the call is intended stepped away for a second or was on another call and was unable to physically

answer the call. While on the phone, the intended receiver returns or finishes the call they were on and

would like to answer the new call.

1. Press the Transfer soft key.

2. Enter the extension for the person who needs to receive the call.

3. Press the Transfer soft key again.

4. Hang up the phone.

Transfer Received call to Receiver's Voice Mail

Instead of the person being at their desk to answer the call, the caller would like that person's voice mail.

1. Press the Transfer soft key.

2. Type in extension 7000.

3. Press the # key to bypass the password.

4. Type in the receiver's 4 digit extension.

5. Press the Transfer soft key again.

6. Hang up the phone

As a user that answers multiple lines, it is necessary to see if the extension for an incoming call is in use.

The line in use should display a handset if the extension is busy. Is this is not the case, please contact

the Help Desk at extension 2052.

The Help Desk at extension 2052 can help with the following Setup Options:

Make all Secondary Extensions Silent. Phone needs to Ring for

Primary Line only.

IP Phone System

Updated April 2006