Cisco 7940G 매뉴얼 - 페이지 13

{카테고리_이름} Cisco 7940G에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7940G 21 페이지. Ios telephony services ip phone
Cisco 7940G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 데이터시트 (7 페이지), 매뉴얼 (35 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (15 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 전화 매뉴얼 (17 페이지), 관리자 매뉴얼 (15 페이지), 사용자 설명서 (16 페이지), 참조 매뉴얼 (24 페이지), 관리 매뉴얼 (29 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (10 페이지)

페이지 인쇄
Cisco 7940G 매뉴얼

Transferring Calls

Transfer redirects a connected call to another party, which may be another user on
your phone system or even an outside party.
If you want to...
Blind Transfer - Transfer a call without talking
to the transfer recipient.
Attended Transfer - Talk to the transfer
recipient before completing the transfer.
Use One-Touch Dials speeds up transferring
calls. See the Web Portal section on how to
establish One-Touch Dials.
To abort a transfer and return to the original
call.

Forwarding All Calls to Another Number

You can use "Call Forward All" to redirect incoming calls for your phone to another
phone number.
If you want to...
Activate Call Forwarding
Cancel Call Forwarding
Tip: When call forwarding is activated, your phone will display this information on
the phone's idle screen whenever the phone is idle with no calls.

Do Not Disturb (DND)

Placing your phone in [DND] keeps your phone from ringing. It will also show you
as unavailable in Our Phones with a bold X.
Then...
From an active call, press [Trnsfr]. Then, dial
the number of the party to transfer the call
to. When the call starts ringing through, press
[Trnsfr] again.
From an active call, press [Trnsfr]. Dial the
number of the party you wish to potentially
transfer to. Wait for the transfer recipient to
answer. To complete the transfer, press [Trnsfr]
again. To abort the transfer and return to the
original call, press [EndCall] on the call with
the transfer recipient. Then, highlight the
original phone call and press [Resume].
From an active call, press the corresponding
One-Touch Dial. This will initiate the transfer.
You can wait for the party to answer and then
press [Trnsfr] or when the call starts ringing
press [Trnsfr] and the call will be transferred to
that party.
Press [EndCall] on the call with the transfer
recipient even if it is still ringing then highlight
the original phone call and press [Resume].
Then...
Press [CFwdAll] (press [more] if necessary to
show [CFwdAll] ). From the "Forward All"
screen, press [Change]. Enter the number to
forward calls to, then press [OK]. Finally,
press [Exit].
Press [CFwdAll]. Press [Cancel]. Finally,
press [Exit].
13