Ricoh Pro L5130e 매뉴얼 - 페이지 5

{카테고리_이름} Ricoh Pro L5130e에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro L5130e 12 페이지. Additional function 2
Ricoh Pro L5130e에 대해서도 마찬가지입니다: 설정 매뉴얼 (44 페이지)

페이지 인쇄

Added Display of Print Remaining Time and Length

⚫

Print Remaining Length / Total Length

The print remaining length / total length is displayed on the "Job" tab of the control panel.

Press [Check Status] key during printing.

Press [Job] tab.

Note:

The print remaining length / total length indicate the feed length required for the

machine to complete the print. Therefore, it will not be the same as the actual printed

image length.

(e.g. In a typical print job with 4C, it is displayed about 0.16 m / 0.52 feet (Total length

for 3 heads) longer than the actual image length.)

It shows the print remaining length / total length for one job currently being printed.

Even if multiple jobs are queued in RIP such as "Continuous Printing", the total

length of all jobs cannot be displayed.

This print remaining length / total length is an approximate guideline and may not

necessarily match the actual length.