Ricoh Pro L5130e 매뉴얼 - 페이지 6

{카테고리_이름} Ricoh Pro L5130e에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro L5130e 12 페이지. Additional function 2
Ricoh Pro L5130e에 대해서도 마찬가지입니다: 설정 매뉴얼 (44 페이지)

페이지 인쇄

Added Head Cleaning Function During Printing

Added Head Cleaning Function During

Printing

Performing Head Cleaning During Printing

[Overview]

Added the new function to perform head cleaning during printing. This allows you to clean

the head immediately when you find a nozzle missing during printing.

[How to operate]

Press [Printing Adjustment] during printing.

Press [Nozzle Cleaning] and [Execute].

Note:

If head cleaning is performed during printing, the drying time will change compared to

the area printed normally, and the color of the printed images may change. Therefore,

the regular print quality cannot be guaranteed when using this function.

Note that the color tends to change especially when the temperature of the print heater

is low (e.g. 40°C/104°F or less). Therefore, it is recommended to use this function only

when the temperature of the print heater is high (e.g. 50°C/122°F or higher).

When this function is performed, the 3 heads will be cleaned in sequence. Each head

cannot be cleaned individually during printing.