CAB EOS5 운영자 매뉴얼 - 페이지 13

{카테고리_이름} CAB EOS5에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB EOS5 15 페이지.
CAB EOS5에 대해서도 마찬가지입니다: 서비스 매뉴얼 (20 페이지)

페이지 인쇄
CAB EOS5 운영자 매뉴얼
5

Cleaning and Replacing the Blades

Warning!
!
 Disconnect the printer from the electrical outlet.
Warning!
!
Risk of injury. The cutter blades are sharp.
i
Notice!
When cutting through the label material instead of the label gap
remains of adhesive may accumulate on the blades. If operating in
backfeed mode, such remains of adhesive may be deposited on the
drive roller as well.
 Clean the drive roller and the cutter blades often.
1
2
3
4
Figure 4
Dismount the cutter
1. Fold down cutter.
2. Push release push button (1) and lift blade unit (2) from the cover (4).
3. If the blades are only slightly dirty it is sufficient to clean them with a soft
cloth and continue with point 5.
13