CAB EOS5 Manuale dell'operatore - Pagina 13

Sfoglia online o scarica il pdf Manuale dell'operatore per Cutter CAB EOS5. CAB EOS5 15.
Anche per CAB EOS5: Manuale di servizio (20 pagine)

Stampa la pagina
CAB EOS5 Manuale dell'operatore
5

Cleaning and Replacing the Blades

Warning!
!
 Disconnect the printer from the electrical outlet.
Warning!
!
Risk of injury. The cutter blades are sharp.
i
Notice!
When cutting through the label material instead of the label gap
remains of adhesive may accumulate on the blades. If operating in
backfeed mode, such remains of adhesive may be deposited on the
drive roller as well.
 Clean the drive roller and the cutter blades often.
1
2
3
4
Figure 4
Dismount the cutter
1. Fold down cutter.
2. Push release push button (1) and lift blade unit (2) from the cover (4).
3. If the blades are only slightly dirty it is sufficient to clean them with a soft
cloth and continue with point 5.
13