CAB EOS5 Operatör El Kitabı - Sayfa 13

Kesici CAB EOS5 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. CAB EOS5 15 sayfaları.
Ayrıca CAB EOS5 için: Servis Kılavuzu (20 sayfalar)

Sayfayı Yazdır
CAB EOS5 Operatör El Kitabı
5

Cleaning and Replacing the Blades

Warning!
!
 Disconnect the printer from the electrical outlet.
Warning!
!
Risk of injury. The cutter blades are sharp.
i
Notice!
When cutting through the label material instead of the label gap
remains of adhesive may accumulate on the blades. If operating in
backfeed mode, such remains of adhesive may be deposited on the
drive roller as well.
 Clean the drive roller and the cutter blades often.
1
2
3
4
Figure 4
Dismount the cutter
1. Fold down cutter.
2. Push release push button (1) and lift blade unit (2) from the cover (4).
3. If the blades are only slightly dirty it is sufficient to clean them with a soft
cloth and continue with point 5.
13