Cisco WUMC710 사용자 설명서 - 페이지 11
{카테고리_이름} Cisco WUMC710에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WUMC710 17 페이지. 802.11ac
Cisco WUMC710에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (17 페이지), 사용자 설명서 (17 페이지)
페이지 인쇄
Linksys WUMC710
Wireless > Wireless Network Site Survey
Click the Wireless Network Site Survey tab to begin a site survey The Wireless
Network Site Survey screen lists the wireless networks detected by the media
connector
Wireless Network Site Survey
Number of Wireless Networks
The number of wireless networks detected by
the media connector is displayed
Select
To connect to a wireless network, click Select Then click Connect
Wireless Network Name
The network name or SSID of the wireless network
is displayed
Signal
The percentage of signal strength is displayed 100% is the strongest
signal strength possible; 0% is the weakest possible
Security
If the network supports Wi-Fi Protected Setup, the Wi-Fi Protected
Setup icon
is displayed The security method used by the wireless network
is displayed
Click Refresh to update the on-screen information
After you have selected a network, click Connect A new screen appears Follow
the instructions for the security method of your network
WPA
Network Name (SSID)
The name of the network you selected is automatically
displayed
Security Mode
WPA Personal is automatically displayed
Passphrase
Enter the key shared by the media connector and wireless router
or access point It must have 8-63 characters
Click Refresh to update the on-screen information
After you have entered the security settings, click Connect
WPA2
Network Name (SSID)
The name of the network you selected is automatically
displayed
Security Mode
WPA2 Personal is automatically displayed
Passphrase
Enter the key shared by the media connector and wireless router
or access point It must have 8-63 characters
Click Refresh to update the on-screen information
After you have entered the security settings, click Connect
Advanced Configuration
10