Cisco Aironet 1240AG Series 빠른 시작 매뉴얼 - 페이지 25

{카테고리_이름} Cisco Aironet 1240AG Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1240AG Series 49 페이지. 802.11a/b/g access point
Cisco Aironet 1240AG Series에 대해서도 마찬가지입니다: 데이터시트 (10 페이지)

페이지 인쇄

Check the release notes for your power sourcing equipment to determine which Cisco IOS

version supports Cisco Intelligent Power Management. For some PSEs, support for Cisco

Intelligent Power Management might not be available yet.

MAC address is the 12- character hexadecimal address of the switch port to which the access

point is attached. The MAC address format is HHHH.HHHH.HHHH.

6. Click Apply. The access point reboots configured with the power

settings you specified.

Note

You might have to refresh your browser screen to see the

current status indicating that the access point radios are

enabled.

Configuring Basic Settings

Before you can configure basic settings, the access point and your PC needs

an IP address. See the

page

18.

Follow these steps to configure basic settings for the access point using the

GUI Express Setup page.

1. Open your browser, and enter the access point IP address in the address

field. A username and password screen appears.

Quick Start Guide Cisco Aironet 1240AG Series Access Point

"Obtaining and Assigning an IP Address" section on