Cisco Aironet 1240AG Series 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Cisco Aironet 1240AG Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1240AG Series 49 페이지. 802.11a/b/g access point
Cisco Aironet 1240AG Series에 대해서도 마찬가지입니다: 데이터시트 (10 페이지)

페이지 인쇄
Cisco Aironet 1240AG Series 빠른 시작 매뉴얼
Status LED
Blue
Light green
Amber or red

Radio and IP Address Configuration

The access point ships with its radio disabled and no assigned IP address or
service set identifier (SSID). You must enable them when you configure the
access point for the first time. The access point no longer is assigned an IP
address. It is configured to obtain an IP address by using a DHCP server. If
your network does not use a DHCP server, you must connect to the access
point console port and assign a static IP address (See the
Address Using the CLI" section on page
2
Status Description
Normal operating condition and at
least one wireless client device is
associated with the access point.
Normal operating condition, but no
wireless client devices are
associated with the access point.
Error condition. See the
the Access Point LEDs" section on
page
42.
20.
"Checking
"Assigning an IP
OL-16714-01