Cisco Aironet 1240AG Series 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Cisco Aironet 1240AG Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1240AG Series 49 페이지. 802.11a/b/g access point
Cisco Aironet 1240AG Series에 대해서도 마찬가지입니다: 데이터시트 (10 페이지)

페이지 인쇄
Cisco Aironet 1240AG Series 빠른 시작 매뉴얼

Before You Start

Before you install the access point, make sure that you are using a computer
connected to the same network as the access point, and obtain the following
from your network administrator:
•
A host name for the access point
•
The case-sensitive SSID for your radio 802.11g and 802.11a radio
networks
•
A Simple Network Management Protocol (SNMP) community name and
the SNMP file attribute (if SNMP is in use)
•
The Media Access Control (MAC) address from the label on the bottom
of the access point (such as 0016462584c), if you plan to use the Cisco
IP Setup Utility to find an access point IP address.
•
If you are not connected to a DHCP server, you can assign an IP address
to the access point using the CLI. In this situation, obtain a unique IP
address for your access point, a default gateway, and subnet mask from
your network system administrator.
Quick Start Guide Cisco Aironet 1240AG Series Access Point
3