Cisco MERAKI MR72 하드웨어 설치 매뉴얼 - 페이지 12

{카테고리_이름} Cisco MERAKI MR72에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MERAKI MR72 16 페이지.
Cisco MERAKI MR72에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

The MR72 is Gigabit Ethernet-capable. To maximize device

performance, a Gigabit Ethernet-capable switch should be used.

4.2.3.5 Attach Power over Ethernet to the MR72

1. Remove the dust cover from the Ethernet port of the MR72.

Unscrew it with a coin or flathead screwdriver.

2. Route the Ethernet cable from the PoE Injector "OUT" port to

the MR72.

3. Install a cable gland on the MR72 end of the cable.

4. Plug the Ethernet cable into the Ethernet port of the Meraki

MR72.

a. Connect the cable to the Ethernet port on the MR72.

b. Screw the gland body into the threaded hole of the port.

Use an adjustable wrench to make sure the gland body is

fully seated in the hole.

c. Insert the split ring gasket into the gland body.

d. Screw the cap tightly onto the gland. You may need a

wrench to fully tighten the cap, but take care not to

damage the cable in the process.

Optional: Make the MR72 a gateway

1. Connect an active internet connection to the "IN" port of the PoE

injector.

4.2.3.6 Attach Grounding Strap

Connect one end of grounding strap to grounding post with included

screw and washer. Securely attach the other end nearby metal

structure.