Cisco MERAKI MR72 하드웨어 설치 매뉴얼 - 페이지 13

{카테고리_이름} Cisco MERAKI MR72에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MERAKI MR72 16 페이지.
Cisco MERAKI MR72에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

4.4 Verify Device Functionality and Test Network

Coverage

Check LEDs The Radio Power LED should be solid white. If it is

cycling rainbow, the firmware is automatically upgrading and the

LED should turn white when the upgrade is completed (normally

in under thirty minutes).

Note: Your MR72 must have an active route to the Internet to

check and upgrade its firmware.

Verify access point connectivity Use any 802.11 client device to

connect to the MR72 and verify proper connectivity using the

client's web browser.

Check network coverage Confirm that you have good signal

strength throughout your coverage area. You can use the signal

strength meter on a laptop, smart phone, or other wireless

device.

5 Troubleshooting

Reference the Meraki knowledge base at

http://meraki.com/support/#kb for additional information and

troubleshooting tips.

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference