Cisco MX200 G2 설치 매뉴얼 - 페이지 6
{카테고리_이름} Cisco MX200 G2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MX200 G2 7 페이지. Wall mount
Cisco MX200 G2에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (8 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 시작하기 매뉴얼 (46 페이지)
페이지 인쇄
Installing Cisco TelePresence MX200 G2 - Wheel Base
4
Snap on the cable channel lid
Lead the cables out at the
front or back as appropriate.
78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
Snap on the cable
channel lid for strain relief.
5
Start up the system
•
Connect to power and LAN/Ethernet.
•
Switch on the system. The power switch is
placed next to the power connector at the
rear side of the system.
Wait while the unit starts up. Normally this takes a few
minutes. It may include automatic software upgrade and
restart of the Touch controller.
•
Follow the instructions on the Touch controller.
Cisco Spark: To find more information on how to
get started with Spark registered systems, visit
http://help.ciscospark.com
articles for room systems.
Other services: For further information on set-up and
configuration, download the Getting Started Guide from the
Cisco web site,
http://www.cisco.com/go/mx-docs
Never move the camera manually when power is switched
on; always use the camera control function on the Touch
controller to change the camera position.
and look for Getting Started
6