Cisco MX200 G2 Installation Manual - Page 6
Browse online or download pdf Installation Manual for Conference System Cisco MX200 G2. Cisco MX200 G2 7 pages. Wall mount
Also for Cisco MX200 G2: Installation Manual (6 pages), Installation Manual (8 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Getting Started Manual (46 pages)
Print Page
Installing Cisco TelePresence MX200 G2 - Wheel Base
4
Snap on the cable channel lid
Lead the cables out at the
front or back as appropriate.
78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
Snap on the cable
channel lid for strain relief.
5
Start up the system
•
Connect to power and LAN/Ethernet.
•
Switch on the system. The power switch is
placed next to the power connector at the
rear side of the system.
Wait while the unit starts up. Normally this takes a few
minutes. It may include automatic software upgrade and
restart of the Touch controller.
•
Follow the instructions on the Touch controller.
Cisco Spark: To find more information on how to
get started with Spark registered systems, visit
http://help.ciscospark.com
articles for room systems.
Other services: For further information on set-up and
configuration, download the Getting Started Guide from the
Cisco web site,
http://www.cisco.com/go/mx-docs
Never move the camera manually when power is switched
on; always use the camera control function on the Touch
controller to change the camera position.
and look for Getting Started
6