Cisco MX200 G2 Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco MX200 G2. Cisco MX200 G2 7 pagina's. Wall mount
Ook voor Cisco MX200 G2: Installatiehandleiding (6 pagina's), Installatiehandleiding (8 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Installing Cisco TelePresence MX200 G2 - Wheel Base

Snap on the cable channel lid

Lead the cables out at the

front or back as appropriate.

Snap on the cable

channel lid for strain relief.

Start up the system

•

Connect to power and LAN/Ethernet.

•

Switch on the system. The power switch is

placed next to the power connector at the

rear side of the system.

Wait while the unit starts up. Normally this takes a few

minutes. It may include automatic software upgrade and

restart of the Touch controller.

•

Follow the instructions on the Touch controller.

Cisco Spark: To find more information on how to

get started with Spark registered systems, visit

http://help.ciscospark.com

articles for room systems.

Other services: For further information on set-up and

configuration, download the Getting Started Guide from the

Cisco web site,

http://www.cisco.com/go/mx-docs

Never move the camera manually when power is switched

on; always use the camera control function on the Touch

controller to change the camera position.

and look for Getting Started