Sony BRC-X401 명령 목록 - 페이지 26
{카테고리_이름} Sony BRC-X401에 대한 명령 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony BRC-X401 41 페이지. Srt introduction
Sony BRC-X401에 대해서도 마찬가지입니다: 매뉴얼 (15 페이지), 기술 매뉴얼 (15 페이지)
페이지 인쇄
Inquiry Command List (5/6)
Number in ( ) is MENU display values.
Inquiry Command
PRESET
SPEED SELECT
SPEED SEPARATE
SPEED COMMON
MODE
CALL MODE
LAST RECALL
*
PTZ TRACE
STATUS
RECORD STATUS
(ALL)
RECORD STATUS
(EACH)
PREPARED NUMBER
IR CUT FILTER
STATUS
AUTO ICR
AUTO ICR
THRESHOLD
*
TALLY
-
*
Only available for BRC-X400/X401.
Inquiry Packet
8x 09 7E 04 1B FF
8x 09 7E 01 0B pp
FF
8x 09 7E 04 1C FF
*
8x 09 7E 04 3D FF
8x 09 7E 04 3B FF
8x 09 04 3F FF
8x 09 7E 04 20 03
FF
8x 09 7E 04 20 10
00 00 FF
8x 09 7E 04 20 10 01
0p FF
8x 09 7E 04 20 01
00 00 FF
8x 09 04 01 FF
8x 09 04 51 FF
8x 09 04 21 FF
8x 09 7E 01 0A FF
Reply Packet
y0 50 0p FF
y0 50 qq FF
y0 50 0p 0p FF
y0 50 pp FF
y0 50 0p FF
y0 50 pp FF
y0 50 0p FF
y0 50 0q 0q 0q 0q
FF
y0 50 0q FF
y0 50 pp FF
y0 50 0p FF
y0 50 0p FF
y0 50 00 00 0p 0p
FF
y0 50 0p FF
26
Comments
p: 0=Compatible (specify the
speed with the same command
as Separate for VISCA, and with
an argument of the Preset Recall
command for CGI), 1=Separate
(operation with individual speed
by a preset), 2=common
(operation with common speed
to all presets)
pp: PRESET No. to confirm the
speed - 1 (00- 63)
qq: Positioning speed (01 - 19)
pp: Common Speed (01-19)
pp: 00=MODE1, 01=MODE2,
10=TRACE
Refer to the sections of PRESET
MODE settings and PRESET
command behaviors
p: 2=Freeze (Freeze the image
from a camera during recalling),
3=Normal
pp: PRESET No. last recalled - 1
(00 - 63, 7F)
p: 0=None, 1=Recording,
2=Preparing, 3=Ready for play,
4=Playing, 5=Deleting
qqqq: Each bit status indicates
whether the record exists or not.
0=No record, 1= Record exists
p: PTZ trace number
q: 0=No record, 1=Record exists
pp: 00 - 0F (PTZ TRACE number
ready for reproduction of 1 - 16)
7F if not ready for reproduction
p: 2=On (Night), 3=Off (Day)
p: 2=Auto ICR On, 3=Auto ICR Off
pp: 00 - FF (Threshold)
p: 2=On, 3=Off