Cisco 2100 Series 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Cisco 2100 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2100 Series 49 페이지. Cisco 8500 series wireless lan controller
Cisco 2100 Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (40 페이지), 구성 매뉴얼 (50 페이지), 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄

Unpacking and Preparing the Controller for Operation

Follow these steps to unpack the controller and prepare it for operation:

Open the shipping container and carefully remove the contents.

Step 1

Return all packing materials to the shipping container and save it.

Step 2

Step 3

Ensure that all items listed in the "Package Contents" section are included in the shipment.

Check each item for damage. If any item is damaged or missing, notify your authorized Cisco

sales representative.

Package Contents

Each 2100 series controller package contains the following items:

• One Cisco 2100 series wireless LAN controller

• One Power supply and power cord

• One Ethernet cable (RJ45 to RJ45)

• One Console cable (RJ45 to DB9)

• This guide

• Cisco product registration card

The controller ships with controller software loaded. When upgrading software, do not

Note

upgrade to any release earlier than release 4.0.197.0

Required Tools and Information

You will need the following tools and information before you can install the controller:

• Wireless LAN controller hardware

Controller with factory-supplied power cord and mounting hardware

–

Network, operating system service network, and access point cables as required

–

• Command-line interface (CLI) console

VT-100 terminal emulator on CLI console (PC, laptop, or palmtop)

–

Null modem serial cable to connect CLI console and controller

–