Cisco 6160 하드웨어 설치 매뉴얼 - 페이지 11

{카테고리_이름} Cisco 6160에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6160 21 페이지. Without a pots splitter configuration
Cisco 6160에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (38 페이지), 설치 및 교체 참고 사항 (18 페이지), 설치 절차 매뉴얼 (32 페이지)

페이지 인쇄
Cisco 6160 하드웨어 설치 매뉴얼
Chapter 2
Preparing for Installation
2.2.1.1 Temperature, Altitude, and Humidity
The Cisco 6160 system can tolerate a wide range of temperatures.
recommendations for temperature, altitude, and humidity conditions in a central office (CO)
environment.
Table 2-1
Environmental
Specifications
Temperature
Altitude
Humidity
To prevent the system from overheating, do not operate it in an area that exceeds the maximum
Warning
recommended ambient temperature of 104˚F (40˚C).
2.2.1.2 Ventilation
The following practices ensure proper ventilation for the Cisco 6160 system:
•
•
•
OL-2190-02 B0
CO Operating Environment Requirements
Description
41 to 104ºF (5 to 40ºC)—Operating
23 to 131ºF (–5 to 55ºC)—Short-term operating
–197 to 13,124 feet (–60 to 4,000 meters)
5 to 90% (noncondensing)
Chassis placement—Leave one rack unit (RU) under each Cisco 6160 chassis for cabling needs and
the intake plenum.
Blower tray installation—A blower tray must be installed in the Cisco 6160 chassis.
POTS splitter location—POTS splitters do not dissipate heat and should be positioned at the bottom
of the rack.
Table 2-1
provides the Cisco
Cisco 6160 Hardware Installation Guide
Site Requirements
2-11