Cisco Aironet 1250 Series 매뉴얼 - 페이지 3

{카테고리_이름} Cisco Aironet 1250 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1250 Series 37 페이지. Aironet 1250 series
Cisco Aironet 1250 Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (40 페이지), 데이터시트 (14 페이지), 하드웨어 설치 매뉴얼 (10 페이지)

페이지 인쇄

1. Configuring the Access Point

Step 2

With your right thumb or forefinger, pull the security hasp toward

you to release it from the mounting plate.

Step 3

Maintain pressure on the security hasp, use your thumb or

forefinger to push the mounting plate to the right, and slide it off the

mounting plate pins.

Step 4

Remove the mounting plate from the access point.

Radio and IP Address Configuration

The access point ships with its radios disabled and no assigned IP address or

service set identifier (SSID). You must enable the radios when you configure

the access point for the first time. Also, the access point no longer is assigned

a default IP address. It is configured to obtain an IP address using a DHCP

server. If your network does not use a DHCP server, you must connect to the

access point's console port and assign a static IP address. See the

and Assigning an IP Address" section on page

Bridging Feature Not Tested

The 1250 series access point has not been tested for bridging purposes, even

though the commands for configuring the unit as a bridge are available.

Quick Start Guide: Cisco Aironet 1250 Series Access Point

18.

"Obtaining