Cisco Aironet 1250 Series Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Мережеве обладнання Cisco Aironet 1250 Series. Cisco Aironet 1250 Series 37 сторінок. Aironet 1250 series
Також для Cisco Aironet 1250 Series: Посібник з конфігурації (40 сторінок), Технічний паспорт (14 сторінок), Посібник з встановлення обладнання (10 сторінок)

Step 2

With your right thumb or forefinger, pull the security hasp toward

you to release it from the mounting plate.

Step 3

Maintain pressure on the security hasp, use your thumb or

forefinger to push the mounting plate to the right, and slide it off the

mounting plate pins.

Step 4

Remove the mounting plate from the access point.

Radio and IP Address Configuration

The access point ships with its radios disabled and no assigned IP address or

service set identifier (SSID). You must enable the radios when you configure

the access point for the first time. Also, the access point no longer is assigned

a default IP address. It is configured to obtain an IP address using a DHCP

server. If your network does not use a DHCP server, you must connect to the

access point's console port and assign a static IP address. See the

and Assigning an IP Address" section on page

Bridging Feature Not Tested

The 1250 series access point has not been tested for bridging purposes, even

though the commands for configuring the unit as a bridge are available.

Quick Start Guide: Cisco Aironet 1250 Series Access Point

18.

"Obtaining