Cisco ASA 5508-X 매뉴얼 - 페이지 5

{카테고리_이름} Cisco ASA 5508-X에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5508-X 14 페이지. Threat defense reimage guide
Cisco ASA 5508-X에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (8 페이지), 간편한 설정 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (9 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (6 페이지)

Overview

LED

Active

SSD

Network Port Status

On the rear panel, a pair of LEDs (Link status and Connection status) for each of the eight Gigabit Ethernet

network ports, and the Gigabit Ethernet Management port.

Link status (L):

• Unlit—No link, or port is not in use.

• Green—Link established.

• Green, flashing—Link activity.

Connection-speed status (S):

• One blink every three seconds—10 Mbps.

• Two rapid blinks—100 Mbps.

• Three rapid blinks—1000 Mbps.

Description

Status of the failover pair:

• Green—Failover pair operating normally.

• Unlit—Failover is not operational.

Status of a high-availability (HA) pair:

• Green—The active-mode unit.

• Amber—The standby unit.

Role of a standalone device:

• Green —The device is active normally.

SSD LED behavior at first customer ship:

• Unlit—No SSD present.

• Green—SSD installed.

SSD LED behavior after June 2017:

• Unlit—No SSD present or no activity on the SSD.

• Green—Activity on the SSD.

See

Remove and Replace the SSD

Note

SSD.

for information on replacing a failed

Overview

LEDs