Cisco ASA 5508-X 매뉴얼 - 페이지 3

{카테고리_이름} Cisco ASA 5508-X에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5508-X 14 페이지. Threat defense reimage guide
Cisco ASA 5508-X에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (8 페이지), 간편한 설정 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (9 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (6 페이지)

Overview

Front Panel

The following figure shows the front panel of the ASA 5508-X. The ASA 5516 has an identical front panel.

There are four LEDS on the front panel. See

Figure 2: ASA 5508-X and ASA 5516-X Front Panel

The following figure shows the rear panel of the Cisco ASA 5508-X and ASA 5516-X.

Figure 3: ASA 5508-X and ASA 5516-X Rear Panel

Power switch

Standard rocker-type power on/off switch

Status LEDs

The locations and meanings of the status LEDs

are described in

LEDs, on page

Management port

A Gigabit Ethernet interface restricted to network

management access only. Connect with an RJ-45

cable.

LEDs, on page 4

for the descriptions.

Power cord socket

The chassis power-supply socket. See

Supply Modules, on page 7

information about the ASA power supply.

Network data ports

Eight Gigabit Ethernet RJ-45 (8P8C) network I/O

interfaces. The ports are numbered (from left to

right) 1, 2, 3, 4, 5, 6, 7, 8. Each port includes a

pair of LEDs, one each for connection status and

link status. The ports are named and numbered

Gigabit Ethernet 1/1 through Gigabit Ethernet

1/8. See

information.

Console ports

Two serial ports, a mini USB Type B, and a

standard RJ-45 (8P8C), are provided for

management access via an external system. See

Console Ports, on page 6

information.

Front Panel

for more

Network Ports, on page 6

for additional

Overview

Power