Cisco ASR 5500 설치 매뉴얼 - 페이지 16

{카테고리_이름} Cisco ASR 5500에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 5500 31 페이지.
Cisco ASR 5500에 대해서도 마찬가지입니다: 설치 절차 개요 (6 페이지)

SSC Run/Fail LED States

Figure 5: SSC Status LEDs

The possible states for all SSC LEDs are described in the sections that follow.

SSC Run/Fail LED States

The SSC Run/Fail LED indicates the overall status of the card. This LED should be green for normal operation.

The possible states for this LED are described in the following table. If the LED is not green, use the

troubleshooting information in the table to diagnose the problem.

Table 16: SSC Run/Fail LED States

Color

Green

Blinking Green

Red

Troubleshooting

Description

Card powered with no errors detected

Card is initializing and/or loading software

Card powered with error(s) detected

Troubleshooting

None needed.

This is normal operation during boot-up.

Errors were detected during the Power On

Self Tests (POSTs). It is likely that the

errors were logged to the system's

command line interface during boot.