Cisco ATA 191 사용자 설명서 - 페이지 10

{카테고리_이름} Cisco ATA 191에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 191 30 페이지. Analog telephone adapter
Cisco ATA 191에 대해서도 마찬가지입니다: 관리 매뉴얼 (4 페이지), 사용자 설명서 (10 페이지), 시작하기 (8 페이지), 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (13 페이지), 설정 매뉴얼 (6 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (30 페이지)

Install Your New ATA

• Overhead paging systems

• Fax machines

Install Your New ATA

Your ATA comes with everything you need to power it up, connect it to the network, and set it up on your

desk.

Before You Begin

Before you begin the installation, make sure you have the following equipment:

• Ethernet cable to connect to your network

• Analog phone or fax machine to connect to your ATA

• Phone cable to connect your phone

• Uninterruptible power supply (UPS) to provide backup power

Procedure

Step 1

Connect the network cable to your network and to the NETWORK port on the ATA.

Cisco ATA 191 User Guide for Cisco Unified Communications Manager

◦ The ATA supports analog telephony voice devices, such as overhead paging adapters and answering

machines, that emulate a regular phone.

◦ Overhead paging systems provide alarms and public-address announcements in buildings.

◦Use a fax machine directly with an ATA. Don't connect an extension to a fax machine, and don't

use the fax machine with a splitter.

◦ To reduce fax failures, use overseas mode, if available; if not, set the fax machine transmission

speed to low.

◦ Data devices, such as facsimile machines and modems, may not function optimally. For the best

fax and modem performance, continue to use a dedicated PSTN line.

Get Started with Your New ATA