Cisco ATA 191 관리 매뉴얼 - 페이지 4

{카테고리_이름} Cisco ATA 191에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 191 4 페이지. Analog telephone adapter
Cisco ATA 191에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지), 사용자 설명서 (10 페이지), 시작하기 (8 페이지), 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (13 페이지), 설정 매뉴얼 (6 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (30 페이지)

Configure Startup Network Settings

Before You Begin

Perform this configuration if you are not using DHCP in your network.

Procedure

Step 1

Configure these network settings on the ATA after you install the device on the network:

• IP subnet information (subnet mask and gateway)

• TFTP server IP address

Step 2

Configure these optional settings as necessary:

• Administration VLAN ID

Step 3

Collect this information.

Security on the ATA 191

Security features protect against several threats, including threats to the identity of the phone and to data.

These features establish and maintain authenticated communication streams between the phone and the Cisco

Unified Communications Manager server, and digitally sign files before they are delivered.

For more information about the security features, see the Security Guide for Cisco Unified Communications

Manager.

You can start the installation of a Locally Significant Certificate (LSC) on the device profile from Cisco

Unified Communications Manager. Use the Device > Phone > Phone Configuration menu option. You can

also use this menu option to update or remove an LSC.

Before you begin, make sure that the appropriate Cisco Unified Communications Manager and the CAPF

security configurations are complete:

• On Cisco Unified Communications Operating System Administration, verify that the CAPF certificate

• The CAPF is running and configured.

See the Security Guide for Cisco Unified Communications Manager for more information.

Cisco ATA 191 Analog Telephone Adapter Administration Guide for Cisco Unified Communications Manager

has been installed.

Install the ATA 191