Cisco ATA 191 관리 매뉴얼 - 페이지 2

{카테고리_이름} Cisco ATA 191에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 191 4 페이지. Analog telephone adapter
Cisco ATA 191에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지), 사용자 설명서 (10 페이지), 시작하기 (8 페이지), 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (13 페이지), 설정 매뉴얼 (6 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (30 페이지)

Safety Recommendations

To ensure general safety, follow these guidelines:

• Do not get this product wet or pour liquids into this device.

• Do not open or disassemble this product.

• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

• Use only the power supply that comes with the ATA.

• Ultimate disposal of this product should be handled according to all national laws and regulations.

• Read the installation instructions before you connect the system to its power source.

• The plug-socket combination must always be accessible because it serves as the main disconnecting

• Do not work on the system or connect or disconnect cables during periods of lightning activity.

• To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network

For translated warnings, see the Regulatory Compliance and Safety Information for the Cisco ATA 191

document.

The ATA 191 package contains the following items:

• Cisco ATA 191 Analog Telephone Adapter

• Regulatory Compliance and Safety Information for the ATA 191

• 5V power adapter with appropriate country clip

• Ethernet cable

Install Your Cisco ATA

You can use either Category 3/5/5e/6 cabling for 10-Mbps connections, but you must use Category 5/5e/6 for

100-Mbps connections.

Cisco ATA 191 Analog Telephone Adapter Administration Guide for Cisco Unified Communications Manager

device.

voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some

LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.

The ATA is intended for use only with the 5V DC power adapter that comes with the

Note

unit.

Install the ATA 191