Cisco ATA 191 사용자 설명서 - 페이지 13

{카테고리_이름} Cisco ATA 191에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 191 40 페이지. Analog telephone adapter
Cisco ATA 191에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지), 관리 매뉴얼 (4 페이지), 사용자 설명서 (10 페이지), 시작하기 (8 페이지), 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (13 페이지), 설정 매뉴얼 (6 페이지), 사용자 설명서 (30 페이지)

Your ATA

If connecting a fax machine, connect it directly to the ATA. Do not connect an extension to a fax machine,

and do not use a splitter.

Step 3

(Optional) If you have a second analog device, connect the phone cable to the PHONE 2 port on the ATA

and to your second analog device.

Step 4

Connect the ATA power cable to the DC 5V POWER port on the ATA, and plug the power cable into your

power source.

Phone Adapter Configuration Utility

You can configure or customize some phone features with the Phone Adapter Configuration Utility webpage.

Your administrator gives you the page URL, your user ID, and password.

In the Configuration Utility page, you can view some network and administration settings, as well as some

basic information about your ATA, such as firmware version, serial number, and memory use.

Most people use the Phone Adapter Configuration Utility page to set up a few basic features such as Speed

dial or Call forward. To set up these features, refer to the following table.

The following table describes the phone features that you configure from the Phone Adapter Configuration

Utility webpage.

Table 3: Configuration Utility Features

Feature

Call forward and Selective call forward.

Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware

Phone Adapter Configuration Utility

Description

You specify the number that will receive calls when

call forward is enabled on the phone. Use the

Configuration Utility page to set up more complicated

call forward functions, for example, when your line

is busy.

For more information, see

Call Forward Settings, on

page 15

Selective Call Forward Settings, on page

and

Set Up Phone Features with Phone Adapter

Configuration Utility, on page

14.