Cisco UCS C220 M3 구성 매뉴얼 - 페이지 26

{카테고리_이름} Cisco UCS C220 M3에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS C220 M3 33 페이지. Security manager 4.3
Cisco UCS C220 M3에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (29 페이지), 업그레이드 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄

Step 4: View the actions being performed on the Storage > Storage Log tab.

Step 5: The rebuild time depends on the drive capacity. After the rebuild is complete, the physical drive status

changes from Rebuild to Online, and the virtual drive health status is listed as Good. View the Storage > Physical

Drive Info tab. Then view the Storage > Virtual Drive Info tab.

Changing the RAID Level with the WebBIOS Utility

As the amount of data and the number of drives in your system increase, you can use RAID-level migration to

change a virtual drive from one RAID level to another. You do not have to power down or restart the system. When

you migrate a virtual drive, you can keep the same number of drives, or you can add drives. You can use the

WebBIOS configuration utility to migrate the RAID level of an existing virtual drive.

Note:

Although you can apply RAID-level migration at any time, you should do so only when no reboot

operations are occurring. Many operating systems run I/O operations serially (one at a time) during bootup. With

RAID-level migration running, a boot operation may take more than 15 minutes.

Follow the steps presented here to change the RAID level using the WebBIOS configuration utility.

Page 26 of 33