Cisco AT&T 3G MicroCell 시작하기 매뉴얼 - 페이지 3

{카테고리_이름} Cisco AT&T 3G MicroCell에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AT&T 3G MicroCell 11 페이지. Wireless signal booster
Cisco AT&T 3G MicroCell에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (20 페이지), 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄

Step 1: Activation

Note:

As an added bene t, when placing a 911 call while connected to your 3G MicroCell, the full location address you

provide at activation will be sent to local emergency responders. A built-in Global Positioning System (GPS)

feature helps deliver this functionality.

Work with your TruVista representative to activate your MicroCell. During this time you will be required to provide

the address where the MicroCell will be located.

Step 2: Con guration and Powering Up

How you con gure your 3G MicroCell is dependent on what equipment you currently use to connect to the Internet.

• If you have either a

• If you only have a

• Place your MicroCell within 3 feet of a window, if possible.

• Make sure your MicroCell is at least 1 foot away from your gateway or modem and Wi-Fi router.

• Refer to FAQ 1.4 on page 9 for additional details on product placement.

Serial # (S/N):

gateway

or a

modem and Wi-Fi router

modem

attached directly to your computer, follow

Write down your 3G MicroCell's

need it for online activation and for future reference.

, follow

OPTION A on page 4

OPTION B on page 5

serial number

as you will