Cisco ATA 186 구성 - 페이지 6

{카테고리_이름} Cisco ATA 186에 대한 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 186 6 페이지. Analog telephone adaptor
Cisco ATA 186에 대해서도 마찬가지입니다: 구성 (28 페이지), 데이터시트 (7 페이지), 개요 (11 페이지), 개요 매뉴얼 (11 페이지), 구성 매뉴얼 (8 페이지), 사용자 설명서 (12 페이지), 설치 및 구성 매뉴얼 (13 페이지), 설치 지침 (6 페이지)

Features: 0x00000000

HardwareVersion: 0x0006 0x0000

Cisco ATA with V2.15 or 2.16 image(SIP)

ata000d6508d994

Version: v2.16 ata18x (Build 030401a)

MAC: 0.13.101.8.217.148

SerialNumber: INM07276617

ProductId: ATA186I1

Features: 0x00000000

HardwareVersion: 0x0006 0x0000

Note : If you are facing some voice quality problem with codec setting 0 then you can try making the codec (LBR, Tx,Rx)setting

3. But with this codec setting you won't be able to make simultaneous calls from both lines(even though dial tone will be

there on both lines but at a time you can make one call ).

In some instances changing this codec value to 3 may result in improvement in voice quality

Change the codec value to 0 in case you want both the lines to make simultaneous calls.

Making a call

To make a call, just pick up the phone, dial the destination number (ex: a call to the US would be 001-<area code>-<destination

number>), and start talking.

To end the call, just hang up the phone.

Future Use

The device (Cisco ATA 186) needs to be configured only once. For every new pack registered, you shall be assigned a PIN

corresponding to the user ID chosen. You will have to simply enter this new PIN into the website (UID0/LogInID0 or UID1/

LoginID1)to start making calls on this account.

2. Cisco ATA 186 Configuration