Cisco IR530 하드웨어 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco IR530에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IR530 28 페이지. Wpan gateway and wpan range extender

IR510 WPAN Gateway and IR530 WPAN Range Extender Hardware Installation Guide

IR510 Installation

Table 4

IR510 LEDs

LED

RS232-DCE

RS485

RS232-DTE

Mounting the IR510 - Airflow Requirements for Rack and DIN Rail

Airflow around the WPAN gateway must be unrestricted. The gateway dimensions (height x width x depth) are 1.125 x 4.0 x 5.0 in. (2.86

x 10.16 x 12.7 cm). To prevent the WPAN gateway from overheating, you must provide the following minimum clearances (see Figures.

Contact your Cisco Technical Assistance Centre (TAC) if tighter spacings are required.

- Sides: 1.0 in. (25.4 mm)

- Front: 1.0 in. (25.4 mm)

- Rear: 1.0 in. (25.4 mm)

- Top: 1.0 in. (25.4 mm)—the device can be installed in a 1.25" tall slot, but the mounting surface must have thermal conductive properties

equivalent to or better then 302 stainless steel (16.3 W/m-k).

Green

Solid: Ethernet Link Established

Blinking: Ethernet Activity Detected

Solid: S0 Port is RS232 DCE

Solid: S0 Port is RS485

Solid: S1 Port is RS232 DTE

Yellow

---

Red

---