Cisco IR530 Panduan Pemasangan Perangkat Keras - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Gerbang Cisco IR530. Cisco IR530 28 halaman. Wpan gateway and wpan range extender
Halaman CetakIR510 WPAN Gateway and IR530 WPAN Range Extender Hardware Installation Guide
IR510 Installation
Table 4
IR510 LEDs
LED
FE
RS232-DCE
RS485
RS232-DTE
Mounting the IR510 - Airflow Requirements for Rack and DIN Rail
Airflow around the WPAN gateway must be unrestricted. The gateway dimensions (height x width x depth) are 1.125 x 4.0 x 5.0 in. (2.86
x 10.16 x 12.7 cm). To prevent the WPAN gateway from overheating, you must provide the following minimum clearances (see Figures.
Contact your Cisco Technical Assistance Centre (TAC) if tighter spacings are required.
- Sides: 1.0 in. (25.4 mm)
- Front: 1.0 in. (25.4 mm)
- Rear: 1.0 in. (25.4 mm)
- Top: 1.0 in. (25.4 mm)—the device can be installed in a 1.25" tall slot, but the mounting surface must have thermal conductive properties
equivalent to or better then 302 stainless steel (16.3 W/m-k).
Green
Solid: Ethernet Link Established
Blinking: Ethernet Activity Detected
Solid: S0 Port is RS232 DCE
Solid: S0 Port is RS485
Solid: S1 Port is RS232 DTE
Yellow
---
---
---
---
9
Red
---
---
---
---