Cisco IR530 Hardware installatiehandleiding - Pagina 9
Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco IR530. Cisco IR530 28 pagina's. Wpan gateway and wpan range extender
Pagina afdrukkenIR510 WPAN Gateway and IR530 WPAN Range Extender Hardware Installation Guide
IR510 Installation
Table 4
IR510 LEDs
LED
FE
RS232-DCE
RS485
RS232-DTE
Mounting the IR510 - Airflow Requirements for Rack and DIN Rail
Airflow around the WPAN gateway must be unrestricted. The gateway dimensions (height x width x depth) are 1.125 x 4.0 x 5.0 in. (2.86
x 10.16 x 12.7 cm). To prevent the WPAN gateway from overheating, you must provide the following minimum clearances (see Figures.
Contact your Cisco Technical Assistance Centre (TAC) if tighter spacings are required.
- Sides: 1.0 in. (25.4 mm)
- Front: 1.0 in. (25.4 mm)
- Rear: 1.0 in. (25.4 mm)
- Top: 1.0 in. (25.4 mm)—the device can be installed in a 1.25" tall slot, but the mounting surface must have thermal conductive properties
equivalent to or better then 302 stainless steel (16.3 W/m-k).
Green
Solid: Ethernet Link Established
Blinking: Ethernet Activity Detected
Solid: S0 Port is RS232 DCE
Solid: S0 Port is RS485
Solid: S1 Port is RS232 DTE
Yellow
---
---
---
---
9
Red
---
---
---
---