TomTom LINK 510 사용자 설명서 - 페이지 33

{카테고리_이름} TomTom LINK 510에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. TomTom LINK 510 37 페이지. Vehicle tracking device
TomTom LINK 510에 대해서도 마찬가지입니다: 설치 매뉴얼 (35 페이지), 설치 매뉴얼 (16 페이지)

페이지 인쇄
TomTom LINK 510 사용자 설명서
If no change-over switch is available, an electric load for example, indicator light or resistor,
between the digital input and ground (GND) or between the digital input and the vehicle voltage
(+9 ... 30V) can offer defined levels.
When using inductive loads, a free-wheeling diode must be used in parallel with the load.

Wiring the digital output

The digital output OUT of the LINK 510 is an open drain output linking to ground. The connected
load must be connected between vehicle voltage and OUT. Loads requiring more than 0.35 A
must be controlled with relays. If the load requires more than the maximum output voltage use a
12 V/24 V relay, depending on the operating voltage.
33