TomTom LINK 510 Benutzerhandbuch - Seite 33

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für GPS TomTom LINK 510 herunter. TomTom LINK 510 37 Seiten. Vehicle tracking device
Auch für TomTom LINK 510: Installationshandbuch (35 seiten), Installationshandbuch (16 seiten)

Seite drucken

If no change-over switch is available, an electric load for example, indicator light or resistor,

between the digital input and ground (GND) or between the digital input and the vehicle voltage

(+9 ... 30V) can offer defined levels.

When using inductive loads, a free-wheeling diode must be used in parallel with the load.

Wiring the digital output

The digital output OUT of the LINK 510 is an open drain output linking to ground. The connected

load must be connected between vehicle voltage and OUT. Loads requiring more than 0.35 A

must be controlled with relays. If the load requires more than the maximum output voltage use a

12 V/24 V relay, depending on the operating voltage.