TomTom LINK 510 User Manual - Page 33
Browse online or download pdf User Manual for GPS TomTom LINK 510. TomTom LINK 510 37 pages. Vehicle tracking device
Also for TomTom LINK 510: Installation Manual (35 pages), Installation Manual (16 pages)
Print Page
If no change-over switch is available, an electric load for example, indicator light or resistor,
between the digital input and ground (GND) or between the digital input and the vehicle voltage
(+9 ... 30V) can offer defined levels.
When using inductive loads, a free-wheeling diode must be used in parallel with the load.
Wiring the digital output
The digital output OUT of the LINK 510 is an open drain output linking to ground. The connected
load must be connected between vehicle voltage and OUT. Loads requiring more than 0.35 A
must be controlled with relays. If the load requires more than the maximum output voltage use a
12 V/24 V relay, depending on the operating voltage.
33