Epson R1400 조립 지침 매뉴얼 - 페이지 16

{카테고리_이름} Epson R1400에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson R1400 21 페이지. Eco-flo continuous ink system

When you have carefully installed and aligned the tube clip in its correct location, press firmly ensuring that the tube

clip is clicked and stuck down to the printer body, as illustrated in Fig.42 below.

Step 16 Installing the Foam Strip

The purpose of the Foam Strip is to ensure that the tubing on the Eco-Flo travels under the printer body correctly, as

well as to cushion the tubes from hitting the printer casing when in motion.

Move the head manually across to the left

and bend back the Foam Strip as illustrated above.

Fig.42

Fig.43

Peel back the yellow sticky tape ready for installation

on the printer body.

IMPORTANT!

Please note from the diagram on

the left, the positioning of the

Foam Strip is crucial in that only

one tube should be visible from

the above angle. Please follow the

steps over the page.

Fig.44