Epson EasyMP Network Projection 운영 매뉴얼 - 페이지 10

{카테고리_이름} Epson EasyMP Network Projection에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EasyMP Network Projection 47 페이지. Multimedia projector
Epson EasyMP Network Projection에 대해서도 마찬가지입니다: 운영 매뉴얼 (47 페이지), 업데이트 지침 (4 페이지), 운영 매뉴얼 (50 페이지), 운영 매뉴얼 (50 페이지), 운영 매뉴얼 (50 페이지), 운영 매뉴얼 (40 페이지), 운영 매뉴얼 (48 페이지), 운영 매뉴얼 (47 페이지)

페이지 인쇄

Connection Modes

Preparing to Connect

Follow the steps below to connect the computer and the projector via a

network using EasyMP Network Projection.

Install EasyMP Network Projection on the computer to be

connected.

s "Installing"

p.7

Make network settings on the computer and put it into

network connection status.

See the documentation supplied with your computer or LAN

adapter for more details on network settings.

When the computer you are using is normally connected to the network,

you do not need to make network settings on the computer.

Make network settings on the projector and put it into

network connection status.

You can make network settings from the projector's Network

menu.

See your projector User's Guide for details.

Press the LAN button on the remote control.

The LAN standby screen is displayed.

If there is no signal for the current input source when a connection

is established with the computer, it automatically switches to the

LAN source. If it does not automatically switch to the LAN source,

press the LAN button.

Start EasyMP Network Projection on the computer and

connect with the projector.

s "Connecting to a Projector on a Network and Projecting"

If a connection error occurs, a number indicating the type of error is

displayed as follows.

Event ID: 04xx

See your projector User's Guide for details on Event ID.

p.11