Epson EasyMP Network Projection Kullanım Kılavuzu - Sayfa 10

Yazılım Epson EasyMP Network Projection için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Epson EasyMP Network Projection 47 sayfaları. Multimedia projector
Ayrıca Epson EasyMP Network Projection için: Kullanım Kılavuzu (47 sayfalar), Güncelleme Talimatları (4 sayfalar), Kullanım Kılavuzu (50 sayfalar), Kullanım Kılavuzu (50 sayfalar), Kullanım Kılavuzu (50 sayfalar), Kullanım Kılavuzu (40 sayfalar), Kullanım Kılavuzu (48 sayfalar), Kullanım Kılavuzu (47 sayfalar)

Connection Modes

Preparing to Connect

Follow the steps below to connect the computer and the projector via a

network using EasyMP Network Projection.

Install EasyMP Network Projection on the computer to be

connected.

s "Installing"

p.7

Make network settings on the computer and put it into

network connection status.

See the documentation supplied with your computer or LAN

adapter for more details on network settings.

When the computer you are using is normally connected to the network,

you do not need to make network settings on the computer.

Make network settings on the projector and put it into

network connection status.

You can make network settings from the projector's Network

menu.

See your projector User's Guide for details.

Press the LAN button on the remote control.

The LAN standby screen is displayed.

If there is no signal for the current input source when a connection

is established with the computer, it automatically switches to the

LAN source. If it does not automatically switch to the LAN source,

press the LAN button.

Start EasyMP Network Projection on the computer and

connect with the projector.

s "Connecting to a Projector on a Network and Projecting"

If a connection error occurs, a number indicating the type of error is

displayed as follows.

Event ID: 04xx

See your projector User's Guide for details on Event ID.

p.11