Epson EasyMP Network Projection Operation Manual - Page 10

Browse online or download pdf Operation Manual for Software Epson EasyMP Network Projection. Epson EasyMP Network Projection 47 pages. Multimedia projector
Also for Epson EasyMP Network Projection: Operation Manual (47 pages), Update Instructions (4 pages), Operation Manual (50 pages), Operation Manual (50 pages), Operation Manual (50 pages), Operation Manual (40 pages), Operation Manual (48 pages), Operation Manual (47 pages)

Print Page

Connection Modes

Preparing to Connect

Follow the steps below to connect the computer and the projector via a

network using EasyMP Network Projection.

Install EasyMP Network Projection on the computer to be

connected.

s "Installing"

p.7

Make network settings on the computer and put it into

network connection status.

See the documentation supplied with your computer or LAN

adapter for more details on network settings.

When the computer you are using is normally connected to the network,

you do not need to make network settings on the computer.

Make network settings on the projector and put it into

network connection status.

You can make network settings from the projector's Network

menu.

See your projector User's Guide for details.

Press the LAN button on the remote control.

The LAN standby screen is displayed.

If there is no signal for the current input source when a connection

is established with the computer, it automatically switches to the

LAN source. If it does not automatically switch to the LAN source,

press the LAN button.

Start EasyMP Network Projection on the computer and

connect with the projector.

s "Connecting to a Projector on a Network and Projecting"

If a connection error occurs, a number indicating the type of error is

displayed as follows.

Event ID: 04xx

See your projector User's Guide for details on Event ID.

p.11