ECI 1000-U LCD 설치 매뉴얼 - 페이지 10

{카테고리_이름} ECI 1000-U LCD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ECI 1000-U LCD 18 페이지.

Figure 1 - Main Menu shows the top 4 items of the main menu. Pressing the "-" button moves the

curser/hi-light down to reveal other menu options

Edit parameters – Pressing ENTER with the Edit Parameters hi-lighted will enter the parameters

menu.

Load Defaults – Pressing ENTER with Load defaults hi-lighted will load the default settings for

all parameters. See section 6.3.5.2 for default settings

Diagnostics – Pressing ENTER with Diagnostics hi-lighted will display the diagnostics screen.

See section 6.3.7 - Diagnostic Menu for more details.

Technical Support – Pressing ENTER with Technical support hi-lighted will display the

technical support screen.

Rotate screen – (Not shown above) Pressing ENTER with Rotate Screen hi-lighted will flip the

screen 180°

6.3.5 Edit parameters Menu

Figure 2 shows the top of the edit parameters menu. All parameters are listed in Section 6.3.5.2 -

Parameter settings and defaults. Pressing the "-" button moves the curser down and pressing the

"ENTER" button selects the highlighted parameter setting. Any changes occur in real time with no need

to press "ENTER". Pressing "ENTER" closes the parameter and sets the parameter at the setting in the

display. Pressing "ESC" returns to the Main Menu.

For speed and force settings, the higher the setting the fast the speed or higher the

force. For DEC the higher the setting the slower the deceleration rate.

Press "ESC" to return to main menu after all settings are complete. This saves all

changes into permanent memory. Failing to do so will result in parameters

reverting to default setting should a power loss occur.

6.3.5.1

Adjustment notes

This equipment must be installed, adjusted and maintained to conform to code requirements.

Parameters must be set to conform to kinetic energy code limitations for maximum and average kinetic

energy for ALL door/all floors (specialty or otherwise heavy doors taken into account).

Parameters must be set to conform to closing force limitations. The closing force may not exceed 135N

(30LBS). During closing, the kinetic energy may not exceed 10 joules (7.4lbs/ft)

ECI 1000-U LCD Installation Manual

ECI Model 1000N

CF cl fast sp.

CS cl slow sp.

SS cl sl. start

CFH cl fast HD

Figure 2 - Edit Parameters Menu

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com

P a g e

| 10