Toshiba XDE600KU 소유자 매뉴얼 - 페이지 14
{카테고리_이름} Toshiba XDE600KU에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba XDE600KU 40 페이지. Upconverting 1080p
extended detail dvd player
Toshiba XDE600KU에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지)
페이지 인쇄
Connections
Connecting to Optional Equipment (Continued)
Connecting to an amplifi er equipped with a Dolby
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest
movies, and is now available to reproduce this realistic effect in the home. You can
enjoy motion picture and live concert DVDs with this dynamic realistic sound by
connecting the DVD player to a 6 channel amplifi er equipped with a Dolby Digital
decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder,
you will obtain the full benefi t of Pro Logic from the same DVD movies that provide
full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby
Surround mark.
Amplifier equipped with a
To COAXIAL
type digital
audio input
Connecting to an amplifi er equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting
an amplifi er and speaker system (right and left front speakers, a center speaker,
and one or two rear speakers).
With an amplifi er equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an amplifi er
equipped with a Dolby
®
Digital decoder." Refer to that amplifi er's owner's manual
and set the amplifi er so you can enjoy Dolby Surround Pro Logic sound.
With an amplifi er not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with
Dolby Surround Pro Logic
14
Dolby Digital decoder
T o wall outlet
Optical digital cable
(not supplied)
75 Ω coaxial cable (not supplied)
To audio
T o wall outlet
input
Audio cable (not supplied)
®
Digital decoder
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
• Use DVDs encoded via the Dolby
Digital recording system.
• Make the following setting.
On-screen display
"Digital Output"
Connect
either
• Make the following setting.
On-screen display
"Digital Output"
* Connect one or two rear speakers.
The output sound from the rear
speakers will be monaural even if you
connect two rear speakers.
To ANALOG
AUDIO OUT
Select:
Page
"PCM" or
33
"Bitstream"
Select:
Page
"PCM" or
33
"Bitstream"