Toshiba XDE600KU 소유자 매뉴얼 - 페이지 16

{카테고리_이름} Toshiba XDE600KU에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba XDE600KU 40 페이지. Upconverting 1080p extended detail dvd player
Toshiba XDE600KU에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지)

페이지 인쇄

Basic playback

Playing a Disc

This section shows you the basics on how to play a disc.

Basic playback

Preparations

• When you want to view a disc, turn on the TV and select the

video input connected to the DVD player.

• When you want to enjoy the sound of discs from the audio

system, turn on the audio system and select the input

connected to the DVD player.

Press the ON/STANDBY button.

ON/STANDBY

The DVD player turns on.

Press OPEN/CLOSE.

The disc tray opens.

Place the disc on the disc tray.

• There are two different disc sizes. Place the disc in

the correct guide on the disc tray. If the disc is out

of the guide, it may damage the disc and cause the

DVD player to malfunction.

• Do not place a disc which is unplayable in this DVD

player.

Press OPEN/CLOSE to close the disc tray.

Playback starts.

If you insert a DVD that contains a top menu, a

menu may appear. Use

title you want to view, then press ENTER to start

playback.

• You may need to press the TOP MENU or MENU

button to display disc menu (depending on the actual

DVD.)

Notes

• If the disc tray is holding a disc you have already played, playback

will begin from the location where you last stopped. For resuming

playback, see

• Some video CD are recorded with PBC (Playback Control), a

menu with recorded contents may appear on the TV if you have

turned the PBC on. You can make your selection according to

its PBC menu. Press the PBC button on the remote control to

turn PBC on or off anytime during Video CD playback. When

switching from PBC off to PBC on mode, playback will start from

the beginning of the disc. To turn on the menu display again, press

the RETURN button.

CAUTION

Keep your ﬁ ngers well clear of the disc tray as it is closing.

Neglecting to do so may cause serious personal injury.

With the playback

side down

to select the

To obtain a higher quality picture

Occasionally, some picture noise not usually visible during

a normal broadcast may appear on the TV screen while

playing a DVD because the high resolution pictures on

these discs include a lot of information. While the amount

of noise depends on the TV you use with this DVD player,

you should generally reduce the sharpness adjustment on

your TV when viewing DVDs.

To start playback in the stop mode

Press PLAY.

To pause playback (still mode)

Press PAUSE/STEP during playback.

To resume normal playback, press the

PLAY button.

• The sound is muted during still

mode.

To stop playback

Press STOP.

To remove the disc

Press OPEN/CLOSE.

Remove the disc after the disc tray

opens completely.

Be sure to press the OPEN/CLOSE

button to close the disc tray after you

remove the disc.

To turn the power off

Press ON/STANDBY to turn the unit off.

Automatic Power Off function

If the DVD player is stopped, or the screen saver is

engaged for approximately 20 minutes, the DVD player

will automatically turn itself off.

Notes

• Do not move the DVD player during playback. Doing so may

damage the disc.

• Use the OPEN/CLOSE button to open and close the disc tray.

Do not push the disc tray while it is moving. Doing so may cause

the DVD player to malfunction.

• Do not push up on the disc tray or put any objects other than

discs on the disc tray. Doing so may cause the DVD player to

malfunction.

• In many instances, a menu screen will appear after playback of

a movie is completed. Prolonged display of an on-screen menu

may damage your television set, permanently etching that image

onto its screen. To avoid this, be sure to press the STOP button

on your remote control once the movie is completed.