Toshiba TDP-WX5400U 소유자 매뉴얼 - 페이지 20

{카테고리_이름} Toshiba TDP-WX5400U에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-WX5400U 42 페이지. Toshiba tdp-wx5400: user guide
Toshiba TDP-WX5400U에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄
Toshiba TDP-WX5400U 소유자 매뉴얼

Basic operations

Turn on the power.
1
Turn on the power by following the instructions in "Turning the power on"
Select the language (When using the first time).
2
When the projector is used for the first time after purchase, the start menu for language
selection is displayed in English. (If the screen is out of focus, adjust it according to the step 6.)
p or q
Use the
button to select the desired language and press the
Message for setup confirmation is displayed in a selected language.
Notes
•
When the projector is turned on the next time, the start menu does not appear upon
startup. However, if [All data] is executed from the Reset menu, the start menu will
be displayed the next time when the power is turned on.
•
The language can also be set from the Setting-Setting 1 menu
•
This owner's manual assumes that English has been selected.
Activate the connected device.
3
Turn on and start the connected device such as a computer.
Press the INPUT button.
4
An image of the connected equipment is projected.
Each time you press the INPUT button, it switches to the input of the connected equipment
that is outputting video signals.
p.36
button.
.
p.51
38
Projector placement angle adjustments
5
.
The placement angle and the height of the projected image can be adjusted by the
foot adjusters.
To raise the level of the projector, twist
1
the adjusters clockwise.
To lower the level of the projector, lift
the projector and twist the adjusters
counter clockwise.
Adjusting zoom and focus
6
If you wish to adjust the screen size,
1
use the ZOOM buttons on the projector
or remote to adjust the screen size.
Use the FOCUS buttons on the
projector or remote to adjust the focus.
Adjusting the Picture Position and
7
Picture Size
The Picture Position and Picture Size can be adjusted manually from the lens control panel
or from the remote control unit (LENS SHIFT button)
Adjusting Picture Position and Picture
Size Manually
Press the Select keypad in any
1
direction to bring up the [Lens Shift]
window.
Press the directional key as required
to shift the image. Releasing the
directional arrow will re-center the
cursor.