Toshiba TDP-WX5400U Manual do Proprietário - Página 20

Procurar online ou descarregar pdf Manual do Proprietário para Projetor Toshiba TDP-WX5400U. Toshiba TDP-WX5400U 42 páginas. Toshiba tdp-wx5400: user guide
Também para Toshiba TDP-WX5400U: Manual de instalação (16 páginas)

Toshiba TDP-WX5400U Manual do Proprietário

Basic operations

Turn on the power.
1
Turn on the power by following the instructions in "Turning the power on"
Select the language (When using the first time).
2
When the projector is used for the first time after purchase, the start menu for language
selection is displayed in English. (If the screen is out of focus, adjust it according to the step 6.)
p or q
Use the
button to select the desired language and press the
Message for setup confirmation is displayed in a selected language.
Notes
When the projector is turned on the next time, the start menu does not appear upon
startup. However, if [All data] is executed from the Reset menu, the start menu will
be displayed the next time when the power is turned on.
The language can also be set from the Setting-Setting 1 menu
This owner's manual assumes that English has been selected.
Activate the connected device.
3
Turn on and start the connected device such as a computer.
Press the INPUT button.
4
An image of the connected equipment is projected.
Each time you press the INPUT button, it switches to the input of the connected equipment
that is outputting video signals.
p.36
button.
.
p.51
38
Projector placement angle adjustments
5
.
The placement angle and the height of the projected image can be adjusted by the
foot adjusters.
To raise the level of the projector, twist
1
the adjusters clockwise.
To lower the level of the projector, lift
the projector and twist the adjusters
counter clockwise.
Adjusting zoom and focus
6
If you wish to adjust the screen size,
1
use the ZOOM buttons on the projector
or remote to adjust the screen size.
Use the FOCUS buttons on the
projector or remote to adjust the focus.
Adjusting the Picture Position and
7
Picture Size
The Picture Position and Picture Size can be adjusted manually from the lens control panel
or from the remote control unit (LENS SHIFT button)
Adjusting Picture Position and Picture
Size Manually
Press the Select keypad in any
1
direction to bring up the [Lens Shift]
window.
Press the directional key as required
to shift the image. Releasing the
directional arrow will re-center the
cursor.